 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Document 428-1 Shielded Power Inductors - LPS3010 Series * Ultra small 3.0 x 3.0 mm footprint; less than 1.0 mm tall * Very low DCR; excellent current handling Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 25 - 32 mg Ambient temperature -40C to +85C with Irms current, +85C to +125C with derated current Storage temperature Component: -40C to +125C. Packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 1000/7 reel; 3500/13 reel; Plastic tape: 12 mm wide, 0.23 mm thick, 8 mm pocket spacing, 1.4 mm pocket depth Recommended pick and place nozzle OD: 3 mm; ID: 1.5 mm PCB washing Only pure water or alcohol recommended Inductance2 Part number1 LPS3010-471ML_ LPS3010-681ML_ LPS3010-102ML_ LPS3010-152ML_ LPS3010-182ML_ LPS3010-222ML_ LPS3010-332ML_ LPS3010-472ML_ LPS3010-562ML_ LPS3010-682ML_ LPS3010-822ML_ LPS3010-103ML_ LPS3010-123ML_ LPS3010-153ML_ LPS3010-183ML_ LPS3010-223ML_ LPS3010-333ML_ LPS3010-473ML_ LPS3010-683ML_ LPS3010-104ML_ LPS3010-124ML_ LPS3010-154ML_ LPS3010-184ML_ LPS3010-224ML_ LPS3010-334ML_ 0.47 0.68 1.0 1.5 1.8 2.2 3.3 4.7 5.6 6.8 8.2 10 12 15 18 22 33 47 68 100 120 150 180 220 330 DCR SRF max3 typ4 20% (H) (Ohms) (MHz) 0.070 0.080 0.085 0.120 0.150 0.220 0.220 0.300 0.400 0.450 0.520 0.540 0.700 0.950 1.10 1.20 2.00 3.20 3.50 5.25 6.10 9.15 10.1 12.5 18.5 370 270 230 165 150 130 110 92 80 70 62 58 47 43 40 36 27 21 21 14 12 11 9 8 7 Isat (A)5 10% 20% 30% drop drop drop 1.8 1.6 1.5 1.3 1.2 1.3 0.83 0.72 0.67 0.61 0.56 0.50 0.46 0.41 0.38 0.32 0.25 0.23 0.20 0.14 0.13 0.13 0.11 0.10 0.10 1.9 1.7 1.6 1.4 1.2 1.4 0.88 0.75 0.69 0.63 0.59 0.53 0.49 0.43 0.40 0.35 0.27 0.24 0.21 0.16 0.15 0.14 0.12 0.11 0.105 2.0 1.7 1.6 1.4 1.3 1.4 0.90 0.77 0.71 0.64 0.59 0.55 0.50 0.44 0.41 0.36 0.28 0.25 0.22 0.17 0.15 0.14 0.13 0.12 0.115 Irms (A)6 20C 40C rise rise 1.3 1.3 1.1 1.05 1.00 0.90 0.85 0.70 0.60 0.56 0.53 0.48 0.44 0.37 0.33 0.30 0.26 0.22 0.20 0.18 0.14 0.13 0.11 0.095 0.085 1.80 1.75 1.50 1.40 1.40 1.10 1.10 0.95 0.78 0.74 0.70 0.64 0.58 0.48 0.47 0.41 0.35 0.31 0.28 0.24 0.19 0.17 0.15 0.13 0.11 1. Please specify termination and packaging codes: LPS3010-223MLC Termination: L = RoHS compliant silver-palladiumplatinum-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C= 7 machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). B= Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D= 13 machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (3500 parts per full reel). 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A. Inductance at 1 MHz is the same for parts with SRF 10 MHz. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using an Agilent/HP 8753ES or equivalent. 5. DC current that causes the specified inductance drop from its value without current. 6. Current that causes the specified temperature rise from 25C ambient. 7. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. Coilcraft Designer's Kit C392 contains samples of 0.80 H to 33 H parts (3 each) from LPS3008, LPS3010 and LPS3015. Kit C401 contains samples of 0.56 H to 33 H parts (3 each) from LPS4012 and LPS4018. Kit C402 contains samples of 220 H to 3300 H parts (3 each) from all five series. For details of kit contents and to order, contact Coilcraft or visit http://order.coilcraft.com. Specifications subject to change without notice. Please check our website for latest information. Document 428-1 Revised 08/05/09 (c) Coilcraft, Inc. 2009 Document 428-2 Shielded SMT Power Inductors - LPS3010 Series L vs Frequency 1000 330 H L vs Current 1000 330 H Inductance (H) Inductance (H) 100 68 H 33 H 100 68 H 33 H 10 6.8 H 3.3 H 10 6.8 H 3.3 H 1 0.68 H 1 0.68 H 0.1 0.01 0.1 1 10 0.1 0.01 0.1 1 10 Frequency (MHz) Current (A) 0.116 0.003* 2,95 0,076 Typical Current Derating 120 110 100 90 80 70 60 50 40 Percent of rated Current 123X Dash number Internal code 0.116 0.003* 2,95 0,076 Winding direction 25C 30 20 10 0 -40 -20 0.035 0.004 0,9 0,1 Recommended Land Pattern 0.020 0,51 0.045 1,14 Isat Irms 0 20 40 60 80 100 120 140 Ambient temperature (C) 0.025 0,64 0.130 3,30 0.035 0,89 0.040 1,02 0.130 3,30 * Dimensions are of the case not including the termination. For maximum overall dimensions including the termination, add 0.005 in / 0,13 mm. Dimensions are in inches mm Specifications subject to change without notice. Please check our website for latest information. Document 428-2 Revised 08/05/09 (c) Coilcraft, Inc. 2009 |
Price & Availability of LPS3010-822ML
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |